Silicone Oil CG1681&CG1682
This product is a non-yellowing silicone fiber finishing agent. It is usually used together with crosslinking agent CG1682. It can provide fiber with excellent smoothness, fluffiness and rebound resilience without affecting the whiteness of the fiber.
Basic Indexes
| CG1681 | CG1682 |
Appearance | White emulsion | Transparent liquid |
Content (%) | 60±2 | 98±2 |
PH value | 6-8 | 5-7 |
Ionicity | Nonion | Nonion |
1. Methods of Application：
(1) Users can adjust the finish concentration according to their own technologies.
Add a certain amount of soft water into the preparation tank, then start to churn.
Add a certain amount of CG1682 components and churn for 10 minutes, then mix with a corresponding amount of CG1681 components, keep churning for 20minutes.
(2) Recommended proportion：CG1681:CG1682=100:3. Users can adjust the oil concentration. When spinning three-dimensional fibers, the effective concentration of the emulsion is 3%.
2. Notices
(1) Valid period: Within 6 months.
(2) Keep the product in a cool ventilated place, avoid low-temperature freezing and away from high temperature exposure.
3. Packaging and Transportation
For product packaging, iron or plastic drums are usually used, and transport as non-dangerous article.
4. Safety Tips
Please follow the industrial hygiene procedures and wear safety goggles and protective gloves when using chemical products. If liquid comes in direct contact with eyes,
immediately flush eyes with copious amounts of water and seek medical attention. If liquid spill occurs, handle it with adsorbing materials, such as sand, soil and wood.
Store the liquid spill into trash barrels and follow local regulations for handling. Before using the product, please carefully read the manufacture’s data sheets and the container labels for safe operation.