Spinning Oil CG228
This product is a kind of highly efficient spin finish oil for hard fiber to improve the elasticity and hardness of fiber. Drying temperature should not be less than 80 ℃. The higher the drying temperature is, the harder touch the fiber has.
Basic Indexes
Appearance
| White liquid
|
Content (%)
| 15%±2 |
PH value
| 4~7 |
1. Methods of Application：
(1) Post-spinning of padding: 0.3%-0.5%
(2) Post-spinning of spraying: CG228/water = 1/3-10.
(3) It is recommended to use spraying process. The oil consumption per ton of finished hard fiber is approximately 5-10KG.
2. Notices
(1) Valid period: Within 6 months.
(2) Keep the product in a cool ventilated place, avoid low-temperature freezing and away from high-temperature exposure.
(3) Please stir it before use to prevent precipitation.
(4) After use, the spraying system must be cleaned immediately to prevent sticking.
3. Packaging and Transportation
For product packaging, iron or plastic drums are usually used and transport as non-dangerous article.
4. Safety Tips
Please follow the industrial hygiene procedures and wear safety goggles and protective gloves when using chemical products. If liquid comes in direct contact with eyes,
immediately flush eyes with copious amounts of water and seek medical attention. If liquid spill occurs, handle it with adsorbing materials, such as sand, soil and wood.
Store the liquid spill into trash barrels and follow local regulations for handling. Before using the product, please carefully read the manufacture’s data sheets and the container labels for safe operation.