Spinning Oil CG298
The product is a kind of pre/post-spinning oil for two-dimensional solid fiber and three-dimensional hollow fiber. It can provide fiber with excellent antistatic property, lubrication, soft touch, cohesion and fluffiness.
Basic Indexes
Appearance
| Yellow liquid |
Content (%)
| 50±2 |
PH value | 6-8 |
Ionicity
| Weak cation |
Water solubility
| Miscible with water |
1. Methods of Application
(1) Recommended finish concentration: pre-spinning: 0.1%-0.5%, post-spinning: 1.0%-2.0%. Users can adjust finish concentration according to their own technologies.
(2) Add a certain amount of soft water into the preparation tank, start to churn, and heat up to 40℃-50℃, then mix with a corresponding amount of CG298, keep churning for about 30min.
(3) This product may become mushy at a low temperature. It will achieve equivalent effect after being churned evenly.
2. Notices
(1) This product can not be mixed with any anion-type finish oil together.
(2) Keep the product in a cool ventilated place, avoid low-temperature freezing and away from high temperature exposure.
(3) Valid period: Within 6 months.
3. Packaging and Transportation
For product packaging, iron or plastic drums are usually used, and transport as non-dangerous article.
4. Safety Tips
Please follow the industrial hygiene procedures and wear safety goggles and protective gloves when using chemical products. If liquid comes in direct contact with eyes,
immediately flush eyes with copious amounts of water and seek medical attention. If liquid spill occurs, handle it with adsorbing materials, such as sand, soil and wood.
Store the liquid spill into trash barrels and follow local regulations for handling. Before using the product, please carefully read the manufacture’s data sheets and the container labels for safe operation.